TS0673-0853b-b led tact switch

FOB Reference Price:Get Latest Price
US $0.001-0.1 / Pieces | 1000 Piece/Pieces 1000pcs/type (Min. Order)
Report Suspicious Activity
Overview
Quick Details
Place of Origin:
Zhejiang, China (Mainland)
Brand Name:
omter
Model Number:
TS0673-0853b-b
Protection Level:
DC12V 50mA
Max. Current:
-
Max. Voltage:
AC250V for 1 minute
1:
Contact sealed construction offers a highly reliable switch.
2:
Reflow solderable.
3:
Packaged with a 12mm/16mm wide embossed taping.
4:
For operating various electronic equipment such as audio devices
5:
video recorders
6:
communication devices
7:
cameras
8:
automotive sets
9:
electric home appliances
10:
and etc.
Supply Ability
Supply Ability:
5000000 Piece/Pieces per Month fast delivery
Packaging & Delivery
Packaging Details
1000pcs/bag
According to customer requirements
Port
ningbo or shanghai
Lead Time :
10-15days

Specifications

1.small size suitable for high density mounting.
2.Much thinner and lighter than conventional products.

   tact switch    

Item no.:     TS0673-0853b-b

 

Detailed picture:

 

Drawing:

 

APPROVAL SPECIFICATIONS:
General characteristics:
Application:This specification is applied to the requirements for TACTILE SWITCH (MECHANICAL CONTACT)
Operating Temperature Range:-20°C~70°C(Normal humidity, normal air pressure)
Storage Temperature Range:-30°C~80°C(Normal humidity, normal air pressure)
Test Conditions
Unless otherwise specified, tests and measurement shall be made in the following standard conditions:
Normal temperature………………5°C~35°C
Normal humidity…………………relative humidity 45%~85%
Normal air pressure…………………86Kpa~106Kpa
If any doubt arise from the judgment, tests shall be conducted at the following conditions:
Temperature………………………20°C±2°C
Relative humidity………………65%±5%
Air pressure…………………………86KPa~106Kpa
Detailed specification:
Appearance: There should be no defects that affect the serviceability of product.
Style and dimension: shall conform to the assemble drawings.
Type of actuating: Tactile feedback.
Contact arrangement: 1 pole, 1 throw. (Details of contact arrangement are given in the assembly drawings.)
Ratings: 12V DC, 50mA (Effective value)
Electrical specification: 
ITEMTEST CONDITIONSREQUIREMENTS
Contact ResistanceApplying a static load of 2 times operating force to the center of the stem, measurements shall be made by 5V DC 10mA or more than 1KHZ AC small-current contact resistance meter.≤50m Ω
Insulation
Resistance
Measurement shall be made following application of 100V DC potential, across terminals, and across terminals and cover, for one minute.≥100M Ω
Dielectric
voltage proof
250V AC (50HZ or 60HZ) shall be applied across terminals, for one minute.No dielectric
breakdown shall
occur.
Contact
Bounce

Lightly striking the center of the stem at a rate encountered in normal use (3 to 4 times per second), and bounce shall be tested at “ON” and “OFF”

 

 

ON-3msec.max.
OFF-8msec.max.
Mechanical specification:
Operating
Force
Placing the switch such that the direction of switch operation is vertical and then gradually increasing the load applied to the center of the stem, the maximum load required for the switch to come to a stop shall be measured.250±50gf
Full TravelPlacing the switch such that the direction of switch operation is vertical and then applying static load of 2times operating force to the center of the stem; the travel distance for the switch to come to a stop shall be measured.0.25±0.1mm
Return ForceThe sample switch is installed such that the direction of switch operation is vertical and upon depressing the stem in its center to the whole travel distance, the force of the stem to return to its free position shall be measured.60gf.min.
Stop StrengthPlacing the switch such that the direction of switch operation is vertical, and then a static load of 30N shall be applied in the direction of stem operation for a
period of 1 min.
There shall be no
sign of damage
mechanically and
electrically.
Stem StrengthPlacing the switch such that the direction of switch operation is vertical,and static load of 30N shall be applied in the direction of stem operation for a period of 1 min20N.min.
Soldering heat Resistance

Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1h before measurement are made:

1)Solder temperature:260 ±5 °C

2)Immersion time 5s ±1s

There shall be no sign of damage mechanically and electrically
SolderabilityMeasurements shall be made following the test set forth below:
1)Solder temperature : 245±5°C
2)Immersion time: 2s±0.5s
Except for the
edge, the coating
should cover a
minimum 90%
Resistance to low
temperature
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 h. before measurements are made:
1) Temperature :-30±2°C
2) Time: 96h
Contact resistance:
≤200mΩ
Heat resistanceFollowing the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 h. before measurements are made:
1) Temperature: 80±2°C
2) Time: 96h
Contact resistance:
≤200mΩ
Change of
temperature

After 5 cycles of following conditions, the sample shall be allowed to stand under normal temperature and humidity conditions for 1 h. and measurements shall be made. During the test waterdrops shall be removed.

 

 

Contact resistance:
≤200mΩ
Moisture
resistance
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1h. before measurements are made:
1) Temperature: 60±2°C
2) Relative humidity: 90% to 95%
3) Time: 96h
Contact resistance: ≤
200mΩ
Sulfuration
resistance
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1h. before measurements are made:
1) H2S gas concentration: 3ppm±1ppm
2) Time: 72h
3) Temperature: 40±2°C(90~95%RH)
Contact resistance: ≤
200mΩ
Salt MistThe switch shall be checked after following test:
1) Temperature: 35°C±2°C
2) Salt solution : 5±1%(solids by mass)
3) Time: 24h±1 hour
After test,salt deposit shall be removed by running
water.
No remarkable
corrosion shall be
recognized in metal
part.
Operation lifeMeasurement shall be made following the test set forth below:
1) DC 12V, 50 mA resistive load
2) Rate of operation: 120 times/min.
3) Operating Force:320~350gf 
4) Average fault-free life:100,000 cycles
Contact resistance:
≤200mΩ
Contact bounce:
≤10ms
Operating Force:
initial value±30%
VibrationMeasurement shall be made following the test set forth below:
1) Vibration frequency range: 10Hz to 55Hz to
10Hz
2) Amplitude: 1.5mm
3) Direction of vibration:Three mutually
perpendicular direction including the direction of
stem travel
4) Duration: Each 2hours.
 
Soldering conditions:
ITEMRECOMMENDED CONDITIONS
Hand
soldering
Please practice according to below conditions:
1) Soldering temperature: 350°C Max.
2) Continuous soldering time: 3 s Max.

 

Conditions for
Auto-dip
ItemsCondition
Flux built-upMounting surface should not be coated with flax
Preheating temperatureAmbient temperature of the soldered surface of PC board. 100°C max.
Preheating time60s max.
Soldering temperature260°C max.
Continuous dipping time5s max.
Number of soldering2times max.

 

Note:
1,After switches were soldered, please be careful not to clean switches with solvent.
2,Right after switches were soldered;please be careful not to load to on the knobs of switches. Please be careful not to pile up PCB. after switches were soldered.
3,Preservation under high temperature and high high humidity or corrosive gas should beavoided Especially . When you need to preserve for a long period ,do not open the carton.

More product:  

 

 

Use of equipment:

 

Express delivery :

 

Sample:  

1. Free charge sample: Could provide(less  than 10 PCS),freight collect

2. Samples time: Need 7-10 days to preparing the samples after receiving the payment. 

3. Samples payment term: T/T, PAYPAL, Western union 

 

Quality Guarantee:

1.Strictly quality control  before leave factory

2. Quality guarantee  within one year  

 

Advantage:  

1.Low MOQ: 1000PCS

2.New design Accepted: As your requirement 

3.Good Service: Customer as God

4.Good Quality: Strict quality control  and good reputation  

5.Fast & Cheap Delivery: Big discount from express agent (Long-term Contract) 

 

Order Guide:  

1. Inquiry-Professional quotation.
2. Confirm the price, lead time, packing requirement, payment term etc.
3. OMTER sales send the Proforma Invoice with OMTER seal.
4. Customer make the payment and send us Bank receipt.
5. Will inform client that we have got the payment, arrange the production & inform the estimated time.
6. After delivery will inform the tracking number and check the status for clients.
7. Feedback to TALL about Quality , Service, Market Feedback & Suggestion. And we can do better .

 

Company Picture:

 

...